Yamaha YXZ Forums banner
1 - 3 of 3 Posts

· Registered
Joined
·
2 Posts
Discussion Starter · #1 ·
throwing code 12 on dash so i ordered the mad hornet stator replacement online and got fresh oil and a new seal so… getting ready to see if it does the trick. Wondering if there is bolts to hold stator on and what those would be torqued to. As well as what the torque specs are for the engine cover that houses the stator. Thank you guys. Also just for info it has almost 7k miles before throwing code 12 on dash. Been acting funny electronically randomly for the past few months. New battery, new starter fuse relay, new spark plugs. Soundbar and 2 light bars as accessories.
 

· Registered
Joined
·
1,093 Posts
The bolts that hold the stator are 7.2 fl lbs and call for loctite. The bolts that hold the crank sensor in place are 4.3 ft lbs and also call for loctite. The cover bolts are 8.7 ft lbs. There does not seem to be a magic number for mileage on these sensors.
 
  • Like
Reactions: 930_NormanRainey
1 - 3 of 3 Posts
Top