Yamaha YXZ Forums banner
1 - 6 of 6 Posts

·
Registered
Joined
·
24 Posts
Discussion Starter · #1 ·
i just purchased a 2021 yxz 1000r ss with the adventure pro. when i installed there adventure pro its turns on with key like its supposed to but it wont read any of the data from the machine, temp, volt, etc.. it just says n/a. I've tried calling customer support but i cant get through. I've called the dealership where i got it from and they have no idea. so I'm hoping someone has an answer on here
 

·
Registered
2019 YXZ SS SE
Joined
·
617 Posts
Their are two ways to hook it up. Did you plug the four way connector to the plug closest to the dash or the plug by the battery? It should be plugged in to the one by the dash on 19+ cars. On the 19+ cars you will not get battery voltage on the adventure pro, but everything else should work.
 

·
Registered
Joined
·
24 Posts
Discussion Starter · #3 ·
Their are two ways to hook it up. Did you plug the four way connector to the plug closest to the dash or the plug by the battery? It should be plugged in to the one by the dash on 19+ cars. On the 19+ cars you will not get battery voltage on the adventure pro, but everything else should work.
It is plugged into the front port but it still says n/a on everything
 

·
Registered
2019 YXZ SS SE
Joined
·
617 Posts
Well, I don't have a clue then. I have one on my 2019 and it work just fine.
 
1 - 6 of 6 Posts
Top