Yamaha YXZ Forums banner
1 - 20 of 38 Posts

·
Registered
Joined
·
753 Posts
What mods are done at this point on dyno pull ? Thanks
 

·
Registered
Joined
·
171 Posts
Is that the Rekluse clutch in action? Otherwise how could you come to a complete stop in 5th gear without stalling?
 

·
Registered
Joined
·
331 Posts
So its legit lols. Some people thought weller's gains were not legit but damn this monster will be unstoppable
 

·
Registered
Joined
·
55 Posts
Is that the Rekluse clutch in action? Otherwise how could you come to a complete stop in 5th gear without stalling?
Didn't come to a complete stop in 5th gear. Look at it again speed only goes down to 20mph before he gets back on it.
Impressive, nice work gentlemen!
 

·
Registered
Joined
·
55 Posts
So what were the hp and torque numbers and what all have you done to the motor?

Edit: Forget it, saw it on another post.
 

·
Registered
Joined
·
4,473 Posts
What mods are done at this point on dyno pull ? Thanks

Here is what Alba has been up to with their retuning of the YXZ.

"BOOM!!!! starting to get somewhere with this awesome platform Yamaha Racing gave us with the new YXZ1000R! Here is what we are seeing for gains so far.... this is a little ecu work, a slip on, and a fuel controller. A lot of room to keep going and play! cant wait to see where we end! Don't forget to notice the change in MPH at the bottom!!!!(this is dyno tires and they are smaller diameter...)"
 

·
Registered
Joined
·
341 Posts
Is that with your smaller dyno tires? Will we see even higher MPH with the stock tires?
That is speedo speed, it doesn't know anything about tire height, all it knows is that rpm is supposed to be that speed with what is supposed to on the vehicle. If you had larger tires and still pulled the same rpm it would still read 100 mph but you would be going faster than 100 mph.
 

·
Registered
Joined
·
677 Posts
WOW that pulled pretty good in 5th! So this thing only has alittle ecu work, slip on n fuel controller? That's it? Does it still have the factory header on it yet? You would think that they would replace the complete exhaust system to get all of that power.
 
1 - 20 of 38 Posts
Top