Yamaha YXZ Forums banner

21 - 26 of 26 Posts

·
Registered
Joined
·
175 Posts

·
Registered
Joined
·
2 Posts
Looks like I did exactly what you were thinking. I just used the little Cyclone lights from KC HiLites. I have the Factory UTV Cage reinforcement kit which puts a horizontal bar right where I needed it to mount the lights.
I used the UTV inc harness for the Red and Amber lights. (Red tied to brake, Amber lights turn on with headlights) The white lights are tied to a toggle switch on my dash, I angled the white ones down a bit and use them for backup and workbench lights.

View attachment 54618
Where did you jump onto that brake light wire at?
 

·
Registered
Joined
·
82 Posts
I used a diode to reduce the running lights LED to a more reasonable level. Then a full power bypass to the same LED lights for the brake circuit. I experiemented with a number of cheap diodes from Fry's. Wish Radio Shack still existed.
 
21 - 26 of 26 Posts
Top