Yamaha YXZ Forums banner

Front end damage

1805 Views 6 Replies 6 Participants Last post by  Yomoe
Well I hit a rock this weekend and put a decent dent in the front clip. The zerk looks like it moved closer to the boot and the top plate for the a-arm has a slight bend to it. Also noticed the axle has some play on the diff side. Anyone have any suggestions on where to start or what to look for? I do have insurance but I’m hoping I don’t have to go that route.
Automotive tire Vehicle Hood Motor vehicle Car

Tire Automotive tire Wheel Motor vehicle Crankset

Automotive tire Tire Hood Automotive lighting Wheel
See less See more
1 - 1 of 7 Posts
rayscar gussets are nice and it covers alot of weak places but it doesnt tie the front to the outside of the frame like the texitera does or the krash front support bars do. i went with the rays car gusset kit , the rear diff support, and the krash support bars. it was more expensive than the way of going with texitera but i feel like it is more beefy this way. if you go either of the routes do it all at once so you dont have to take it apart over and over.

it does look bent though based on the support between the 2 aarm mounting points being bowed down
  • Like
Reactions: 1
1 - 1 of 7 Posts