Yamaha YXZ Forums banner

1 - 7 of 7 Posts

·
Registered
Joined
·
10 Posts
Discussion Starter #1
I guys!
I am going to mount four 30” 10 r14 wheels on moose 14" rims model 387X offset 4 + 3.
better 7 "or 8"?
the 7 "load capacity 675 lb,
the 8" load capacity 1150 lb.
Thanks
 

·
Registered
Joined
·
1,087 Posts
I was told by a guy that installed the 4-3 offset that he gets a lot of feed back in the steering. Said if he had a do over he would go to a 5-2 offset .
 

·
Registered
Joined
·
10 Posts
Discussion Starter #3
I was told by a guy that installed the 4-3 offset that he gets a lot of feed back in the steering. Said if he had a do over he would go to a 5-2 offset .
thanks for the information, then i will use 5 + 2 offset with wheel spacers
 

·
Registered
Joined
·
1,087 Posts
Why are you going to use spacers? It’s seems that the 5-2 offset with 30-10-14 tire is about the most popular combo used .
 

·
Registered
Joined
·
10 Posts
Discussion Starter #5
Why are you going to use spacers? It’s seems that the 5-2 offset with 30-10-14 tire is about the most popular combo used .
I thought it would lose stability with the 30 "wheels. In Italy there will be 20 units of yxz sold .. difficult to find real information here. thank you very much
 

·
Registered
Joined
·
1,087 Posts
I guess you will move the center of gravity up with larger 30 inch tires but I assure you there hundreds of yxz on 30 inch tires in the deserts of calif and Arizona without spacers .
 
1 - 7 of 7 Posts
Top