Yamaha YXZ Forums banner
1 - 3 of 3 Posts

·
Registered
yzx1000rrss turbo LT
Joined
·
1 Posts
Discussion Starter · #1 ·
hello located washington state, probably been a thread on this but i can't find it, here goes, have a 2020 yzxss i have stage 2 dlp kit running 15psi 4:1 mix race fuel, power is putting down roughly 220ish i think, its bone stock motor should i look into building bottom end? i heard the 2020 + models how much more reliable. if i should look into shims buckets pistons and rods, would anyone have recommendations on a company, i would prefer it was reliable shooting for roughly 350whp
 

·
Registered
2018 YXZ1000R SE
Joined
·
2 Posts
hello located washington state, probably been a thread on this but i can't find it, here goes, have a 2020 yzxss i have stage 2 dlp kit running 15psi 4:1 mix race fuel, power is putting down roughly 220ish i think, its bone stock motor should i look into building bottom end? i heard the 2020 + models how much more reliable. if i should look into shims buckets pistons and rods, would anyone have recommendations on a company, i would prefer it was reliable shooting for roughly 350whp
Alba puts a parts kit together for this, but i think being SS your going to want the Boost lock kit for the trans that just came out recently.
 

·
Registered
Joined
·
54 Posts
hello located washington state, probably been a thread on this but i can't find it, here goes, have a 2020 yzxss i have stage 2 dlp kit running 15psi 4:1 mix race fuel, power is putting down roughly 220ish i think, its bone stock motor should i look into building bottom end? i heard the 2020 + models how much more reliable. if i should look into shims buckets pistons and rods, would anyone have recommendations on a company, i would prefer it was reliable shooting for roughly 350whp
Get the kit from Packardperformance.com They have several kits :devilish: Top of the line
 
1 - 3 of 3 Posts
Top