[fortrdb]

Maybe modify something from Harbor Freight or so....

 

[roofintrash]

I'd get a chunk of 1" steel plate and make my own. Drill and tap a center hole and carefully measure the other holes. Probably cost a fraction of the Yamaha puller. Just a little time.

 

[Gibbster]

Well waiting for this puller to arrive. Seems pattern same as other harmonic balancer pullers at not over 4-1/2” spans on bolts and this kit has a short driving bolt which i could not find on any other puller kit. Will update this next week if works and would be a much cheaper solution and will work for many other applications later so either way i can use it.

 

[Gibbster]

Tool modified, trimmed off ends of 3” drive bolt with aftermarket kit and end cap that spins and pushes safely on crankshaft.

 

[Gibbster]

 

[Gibbster]

And the verdict is in. It just fired up, we’re keeping the yxz!!!!! 🤪

 

[YXZMonster]

It purred like a restless YXZ that's begging to get rode! LoL

 

[Gibbster]

Ready to ride again! This weekend i think it needs a good 80 plus mile ride to literally shake off the cob webs.

 

[leadmic]

What are those RCA jacks next to the rear upper A-arm for?

 

[Gibbster]

What are those RCA jacks next to the rear upper A-arm for?

rear view camera